Sterilin Consumables

Glass- and plastic articles for research, standard and microbiology laborratories as well as clinical and industrial applications

Autoclave bags

  • For contaminated waste disposal in autoclaves or incinerators
  • Two versions: for 121°C and 135°C
  • 3 different sizes
  • Suitable waste boxes and holders available
  • Also available: “Steriblend“ bags for homogenizing

"BenchGuard" - Absorbent paper for protecting benches and other surfaces

  • Choice of absorption rate - 400 ml/m² or 800 ml/m²
  • One side plastic coated to prevent leakage
  • Available in roll or sheet form
  • Rolls supplied in easy-to-use dispenser packs

Contact dishes

With optimized design, ideal for use in routine hygiene monitoring of surfaces.

Advantages of the special concave bottom:
  • Drying medium is raised in the centre of the plate for better contact of agar and testing surface
  • More precise results
  • Triple vented - aids gaseous exchange
  • Numbered grid (25 cm²) - facilitates colony counting

Containers

  • Also certified pyrogene- , DNase/RNase and human DNA free containers
  • From PP or PS, clear or coloured
  • Many sizes
  • Different type of closures
  • With/without lables
  • Special models like Bijou
  • 30 ml Polystyrene containers with integral spoon available
  • Endotoxine- and pyrogen free containers on offer
  • CE marked versions
  • Also containers with “QuickStart“ screw cap
  • 95 kPa validated containers for safe and reliable transport of biological samples available
  • Also double bagged versions

Dippas®
(Sample collecting container with integral handle)

  • For collecting sample and - after snapping off the shaft - same container can be used for transport and further storage
  • Three sizes: 30 ml, 100 ml and 250 ml
  • Individually wrapped
  • Sterile
  • Also available in blue polystyrene which is especially useful for the food industry (in case of leakage)
  • Leak-free according to BS EN 14254 Annex D

Glass culture tubes

  • Manufactured from Pyrex® Borosilicate glass, autoclavable
  • High resistance to temperature and chemical attack
  • Rimless or screw thread
  • Caps with autoclavable PTFE- or rubber-liner
  • Round or flat base

Inoculating loops and needles and drigalski spreader

  • 1 µl and 10 µl
  • Sterile 
  • Colour coded
  • Ring or ball end
  • Made from Polystyrene
  • Free from oils and lubricants

96-Well Microtiter plates

  • Available with U, V, or flat bottom
  • Excellent optical clarity
  • Compatible with most readers and washers
  • Suitable lids available
  • White plates for bioluminescence studies
  • Black plates for fluorescence assays
  • CE-marked

Petri dishes

  • Crystal clear or coloured polystyrene
  • Different sizes and forms with/without aerating vents
  • Manufactured under aseptic conditions
  • Compartmented and square plates
  • Sterile (aseptic or gamma irradiated)
  • Also CE-marked versions
  • Stackable
  • Ideal for use in automatic plate pourers
  • All 90 mm petri dishes and 501V are manufactured and tested according to                ISO 24998:2008

Serological Pyrex® glass pipettes

  • Made from chemically resistant Pyrex® Borosilicate glass
  • Also individually wrapped in paper or as bulk package available
  • Including certificate for quality, sterility and stability (with lot. no.)
  • Standard sizes (0.5, 1, 2, 5 and 10 ml)
  • Sterile or non-sterile
  • Plugged/unplugged
  • 1 and 50 ml short pipettes for narrow working space (LAF)

Serological Polystyrene Pipettes

  • Manufactured from virgin grade polystyrene
  • Including certificate for quality, sterility and stability (with lot. no.)
  • High-accuracy, colour coded
  • Also available packed only in paper
  • Small or bulk packages
  • Extensive range:
    • Standard sizes (1, 2, 5, 10, 25 and 50 ml)
    • Short 5 and 10 ml for narrow working space (LAF)
    • Pipettes with narrow opening
    • Pipettes with wide opening (for viscous liquids)

Test and sample tubes

  • Round and flat base
  • PS or PP
  • Screw or plug cap
  • With/without lable, printed or plain
  • 0.6 ml  -  20 ml
  • CE-certified versions

Water sampling bottles

  • Made of durable PET or PS
  • Round 500 ml bottles made of polystyrene
  • Convenient way of sampling both chlorinated and nonchlorinated water for microbiological investigations
  • Different types and sizes
  • With/without sodium thiosulphate available with
    colour-coded caps
  • Cap design minimizes risk of contamination
  • Gamma-irradiation
  • 350, 500 and 1000 ml
  • Tamper-evident caps for sample integrity
  • Octagonal shape for easy handling, transport and storage

Weighing Boats

  • Manufactured from high impact polystyrene
  • Hydrophobic surface ensures no absorption of water from atmosphere or sample
  • Available in black or white for better visibility of different coloured sample material
  • Anti-static to avoid issues with powder
  • Flat base for a secure, firm rest on the balance pan
  • Non-sterile
  • Square or diamond shaped versions

12-2022
Share by: