50 µm polyolefine foil with 50 µm encapsulated silicone adhesive
Encapsulated silicone adhesive is non-tacky until pressed against sealing surface at which time it is released and forms the strongest available seal around each well
Optical clear with low autofluorescence
Chemical inert with exclusion of extreme pH-values, DMSO-resistant
Certified DNase-, RNase-, and nucleic acid-free
Dimensions: 78.6 x 133.0 mm
Temperature range: -70 °C to +100 °C
Sterile and non-sterile versions, non-pierceable
Application: RT-PCR, storage, protein crystallization
Designed to seal only one or two 8-well rows at a time
Supplied in convenient sheets of four rows
NOTE: Spacing does not permit simultaneous application of more than 2 strips
Available as:
SealPlate®: 50 µm PES-film; sterile and non-sterile versions; non-pierceable; temperature range: -40 °C to +120 °C; for immunoassays, incubation and storage; dimensions per strip: 19.1 x 82.6 mm
ThermalSeal®:
50 µm PP-film; non-sterile; non-pierceable; temperature range: -40 °C to +120 °C; for thermal cycling applications; dimensions per strip: 19.0 x 76.2 mm
Economical and user-friendly alternative to strip caps
Precision cut to a smaller dimension to seal a single 8-well row of a 96-well plate or single 8-tube strips
Available as:
FilmStrips™:
50 µm PP-film; sterile and non-sterile versions; non-pierceable; temperature range: -40 °C to +120 °C; reduces evaporation, cross-contamination and spillage storage; for incubation and general use; 8 FilmStrips™ on continuous backing liner per sheet
PCR Film Strips™:
50 µm PES-film; non-sterile; non-pierceable; temperature range: -40 °C to +120 °C; reduces evaporation, cross-contamination and spillage storage; for PCR, qPCR and storage; 8 FilmStrips™ on continuous backing liner per sheet
FoilStrips™:
50 µm Aluminium foil; non-sterile; pierceable; temperature range: -80 °C to +120 °C; excellent chemical resistance (e.g. DMSO); reduces evaporation, cross-contamination and spillage; for PCR, storage and light sensitive assays; 6 FoilStrips™ on continuous backing liner per sheet
Convenient, easy and fast film application for microplates
Includes moulded PP-dispenser with hinged “clamshell” design and sealing films supplied in a novel sheeted-roll configuration
Dispenser also protects unused film
Available as:
SealPlate®
(colour code: green): 38 µm PES-film; sterile and non-sterile versions; non-pierceable; temperature range: -40 °C to +120 °C; for immunoassays, incubation and short-term storage; 100 plates/roll
AeraSeal™
(colour code: red): 140 µm, hydrophobic porous rayon film; sterile and non-sterile versions; pierceable; temperature range: -20 °C to +80 °C; for a steady exchange of air and CO2; non-toxic; for tissue culture, bio-blocks, bacterial growth; 50 plates/roll
eXTReme Seal
(colour code: blue): 50 µm, PES film; non-sterile; pierceable; temperature range: -20 °C to +120 °C; for PCR and qPCR, 80 plates/roll
Economical and efficient way to rapidly seal microplates
Self-standing, non-slip supports hold pre-scored film roll in place
Continuous backing liner can be torn off or fed directly into a waste basket
Roll tension can be adjusted (e.g. loose, tight)
Available as:
SealPlate®:
50 µm PES-film; non-sterile; non-pierceable; temperature range: -40 °C to +120 °C; for immunoassays, incubation and short-term storage; 500 plates/roll
FoilSeal™:
50 µm Aluminium foil; non-sterile; pierceable; temperature range: -80 °C to +120 °C; excellent chemical resistance (e.g. DMSO), reduces evaporation, cross-contamination and spillage; for cold storage, standard PCR, light sensitive assays; 500 plates/roll
Fast, efficient, high-throughput sealing of microplates, 2.5 to 5 sec/plate
Provides reliable and efficient sealing at a lower cost per plate with minimal user intervention
Film rolls are constructed on a 7.62 cm plastic core, which makes them compatible with most automatic sealers
Available as:
ThermalSeal RTS™:
50 µm PO-film with 50 µm inert silicone adhesive; optically clear; non-sterile; non-pierceable; temperature range: -70 °C to +100 °C; for RT-PCR, storage and crystallization; 540 plates/roll
AlumaSeal®
Foil:
38 µm Aluminium foil with 38 µm acrylic adhesive; non-sterile; pierceable; temperature range: -80 °C to +120 °C; for PCR, long-term cold storage and sample recovery; 830 plates/roll
FoilSeal™:
140 µm, hydrophobic, porous rayon film; non-sterile; pierceable; temperature range: -20 °C to +80 °C; for a steady exchange of air and CO2; non-toxic; for tissue culture, bio-blocks, bacterial growth; 830 plates/roll